Ultra-Performance Silicone - Exceeds GB Standards
Features:
1: Single-part, neutral-cure RTV silicone elastomer.
2: Substrate-inert bonding (non-corrosive to metals/stone/glass).
3: Superior environmental resistance: UV, thermal extremes,
humidity, ozone degradation.
4: Thermoplastic resilience: -50°C to +180°C operational range.
5: ±35% joint movement accommodation capability.
Applications:
1: Skyscraper curtain wall systems
2: Aluminum alloy curtain wall joint sealing
3: Terra cotta panel facade structural grouting
4: Concrete substrate expansion joint treatment
5: Polymeric interface bonding & sealing
6: Metal framework waterproof joint filling
7: Roof expansion joint systems
8: Aluminum composite panel (ACP) curtain wall engineering
Specification:
Operating conditions of 23±2°C and 50±5%RH, then test:
No. | Property | Standards | Results |
1 | Type | / | OXIEM |
2 | Density | g/cm³ | 1.43 |
3 | Tack-Free Time / H | ≤3 | ≤1 |
4 | Extrusion Rate (ml/min) | ≥150 | ≥250 |
5 | Shore A Hardness | 20~60 | 40~50 |
6 | Elastic recovery rate (%) | ≥80 | ≥90 |
7 | Tensile Modulus (MPa) | 23°C | ≥0.6 | ≥0.8 |
8 | -20°C | ≥0.6 | ≥0.8 |
9 | Constant Elongation Bonding | Non-Destructive | Meet The Standards |
10 | Constant Elongation After Immersion | Non-Destructive | Meet The Standards |
11 | Adhesion After Immersion in Water and Light | Non-Destructive | Meet The Standards |
Typical property data values should not be used as specifications.
Assistance with specifications Are available by contacting us.
FAQ:
Q1. Can I have a sample order for the Silicone Sealant?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: 2-3 days for Sample preparing ,5-7 working days for mass
production.
Q3. Do you have any MOQ limit for silicone sealant?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Mass production will be shipped by sea. Sample order will be
shipped by FedEx or other international express.
Q5. How to proceed an order for silicone sealant?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on silicone sealant product?
A: Yes. Please inform us formally before our production.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 25 years warranty to our products.
